|
Note : The specifications here could apply only to my TEM, use it on your own risk.
Physical requirements:
- Power : 4.5 kW, three phase / single phase?
- Cooling water : 4 l/minute at 1.5 to 5 kg/cm2.
- Floor space : recommended 2.8x3 m.
- Ceiling height : 2.57m minimum.
- Floor strength : 350 kg/m2.
- Minimum door size : 80x180 cm.
- Weight : 1200+300+115+40 kg.
-
Vacuum system:
- Two Gaede oil rotating roughing pumps, 100 l/min, down to 10 Torr.
- Two oil diffusion pumps with a capacity of 450 l/s down to 10 Torr.
- three pirani gauges (camera chamber, column and anode chamber).
- Optional liquid nitrogen baffle (mounted).
- Dessicator with door for films.
- A number of electrical, pneumatic and manual valves.
- Ultimate system pressure 10 Torr.
-
-
-
Power systems:
- External power supply unit (300 kg).
- High tension 0, 20, 40, 60, 80 and 100 kV.
-
-
-
-
-
-
Resolution:
- 23 fixed resolutions between 1050 - 800000 times magnification
- Spot size: 3 Å.
-
-
Extras:
- ASID SEM module.
- Liquid nitrogen baffle.
-
-
-
Some internal links :
Some external links :
JEOL 100 CX - .....
JEOL 100 CX-II Scanning-Transmission Electron Microscopy (STEM)
The
TEMSCAN 100CX-II is a high performance combined electron microscope consisting
of the 100CX-II TEM and a scanning attachment of ASID-4D; it has a
magnification range for the TEM mode of 360X to 320,000X and 10X to 200,000X
for the SEM mode, with a resolution of 2 angstrom.
|